Design by: playgroundIdeas

Category: Groundlevel, Tyre Elements

Design Description

This structure is a fun element to add to any playground.

Building Steps

1. Cut both side walls off the car tire
2. Cut through the middle of the car tire, this is hard work!
3. Cut a section out of the car tire
4. Grind the edges to smooth where the wire is showing
5. Bolt one end of the strip onto the motorbike tire.
6. Bolt the other end onto the truck tire
7. Dig holes to bury the bottom thirds of the truck and motorbike tire.
8. If the stick has bark scrape this off and paint it.
9. Drill a hole through the stick and bolt it into the truck tire

This motorbike can be painted with any awesome colours and designs you like.



This plan is designed to be used in conjunction with your appropriate, local safety guidelines / standards and the advice of local skilled builders / engineers.  If your location has no guidelines or standards, we have provided a summary of many of the most common hazards here.

This plan is for pre-school (4+) and school-age children, and are not designed for babies and toddlers. Designs will need to be redesigned for these age groups.

This element can have overlapping safe fall areas.

This element should be no higher than 600mm and needs a clear safe fall zone of 1500 mm (5’) around it.

This element needs soft fall material below it in the safe fall zone.

All tires need to have holes drilled or cut at their lowest point to ensure good drainage. This will reduce the risk of mosquitos and their associated issues, such as malaria, etc. the sidewall is easier to cut than the tread for this purpose.


**IMPORTANT** Please see safety guidelines here for further details on the above safety points.



This LIABILITY DISCLAIMER and CREATIVE COMMONS LICENSE WORDING is offered for support, guidance and advice only and should not be relied upon in place of professional or expert advice. We make no representation or warranty of any kind, express or implied, about the completeness, accuracy, reliability or suitability with respect to the LIABILITY DISCLAIMER and CREATIVE COMMONS LICENSE WORDING. Further, Playground Ideas make no representation that this LIABILITY DISCLAIMER and CREATIVE COMMONS LICENSE WORDING adhere to any safety standards in your country and therefore each project/playground built should be assessed on an individual basis in order to ensure compliance with national safety standards in the applicable country.

To the maximum extent permitted by law, in no event will Playground Ideas be liable for any loss or damage including without limitation, direct, indirect or consequential loss or damage, loss of profits or loss of opportunity arising out of or in any way connected with the any person acting or refraining from acting in reliance of the LIABILITY DISCLAIMER and CREATIVE COMMONS LICENSE WORDING or for failure to comply with the national safety standards in the applicable country, whether based in contract, tort (including negligence), strict liability or otherwise.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License. This means if you use or feature this work in any website, publication, presentation etc, you must clearly attribute/ credit the work to (but not in any way that suggests that PlaygroundIDEAS endorses you or your use of the work). You may not use this work for commercial purposes without explicit permission. You may not alter, transform, or build upon this work but you may create and add new work to the PlaygroundIDEAS design library to share. To view a copy of this license, visit

Builders who added this design also added